VAIO Digital Studio Upgrading And Maintaining page 7

Installing Memory
To avoid damaging the RIMM slot, move the RIMM slot tabs slightly outward
to relieve pressure. The module should click easily into place.
11 Reinstall the power supply and any add-on cards or components you
removed.
Reinstall the power supply by following these steps:
Rotate the power supply to its original position and slide it into the
chassis until the tab snaps into position.
Replace the screw that secures the power supply to the rear of the
chassis.
12 Replace the side cover as described in "Replacing the Side Cover.''
Latch
Edge Connectors
Adding Memory
7