VAIO Digital Studio Upgrading And Maintaining page 13

8 Connect the second drive connector to the new drive. Be sure to orient the
connector so that pin 1 on the red side of the ribbon cable is aligned with pin
1 of the new drive.
9 Connect the second power connector to the new drive (see the manual that
came with your drive for detailed instructions).
Replacing the Drive Holder
10 Replace the side cover as described in "Replacing the Side Cover.''
11 Reconnect the power to your computer.
To set up the new hard disk drive with the startup disk
1 Insert the startup floppy disk into the floppy disk drive. Press the power
button and turn your computer on. A startup menu appears.
2 Select the option "4. Minimal Boot" to start your system. Wait until the
system completes startup.
3 Type in "fdisk" and press Enter.
4 Select the option "5. Change current fixed disk drive".
5 Select the second hard disk drive by typing in "2" and press Enter.
6 Select the option "1. Create DOS partition or Logical DOS Drive" and press
Enter.
Installing an Additional Hard Disk Drive
13