VAIO Digital Studio Upgrading And Maintaining page 12

4 Unlock the drive holder from the chassis by pulling down on the tab located
at the bottom of the drive holder and then slide it out.
Removing the Drive Holder
5 Slide the new drive into the drive holder and align the holes on each side of
the drive bay.
Attaching the Drive Screws
6 Secure the drive to the drive holder using the two holes on each side of the
drive holder (screws are provided with the new drive). Do not overtighten the
screws.
7 Align the drive holder with the slots on the inside of the chassis. Slide the
drive holder in completely and push up on the bottom tab to lock it in
position.
12