VAIO Digital Studio Upgrading And Maintaining page 6

Interior RIMM Banks (Inside System)
Crimms (2) installed
in Bank 1 by default
64 MB (2) Rimms
installed in Bank 0
by default
6 Handle the RIMM only by the edges, and remove it from its anti-static
package.
7 Locate the notches on the bottom edge of the RIMM.
8 Align the module over the banks that originally held the CRIMMs.
9 Firmly insert the bottom edge of the RIMM into the bank.
10 Press evenly against the RIMM's upper corners. The end latches snap into
position automatically.
6
1
BANK
0
BANK