Maintenance - Joovy Tricycoo Instruction Manual

EN FR ES
• Attach the baby surround arms to the connector mounted on the steering column. See Figure 19.
• After snapping both arms in place, secure the arms by reinstalling the small black secondary arm locks into the locking gaps. Make sure
the locks snap fully in place. Pull up on the locks and arms to make sure they are secure.
• To remove the baby surround first remove the black secondary arm locks and release both arms from the baby surround connector.
See Figure 20.
• Place the black secondary arm locks back on the arms so you don't lose them.
• Pull back on the rear tabs of the baby surround base and then lift up. See Figure 21.
8 Front Wheel Pedal Locking System
• To FREE the front pedals, pull the lever counter-clockwise. This allows the pedals to spin without the force of the wheel to prevent injury to
the child's feet. See Figure 22.
• To LOCK the front pedals, pull the lever clockwise. This will allow the child to pedal the tricycle on his own power. See Figure 23.
9 Collapsible Footrest
• To use the footrest, pull on the cylinder and swing the footrest down. Then unfold the footrest pedals into the down position.
See Figure 24.
• Reverse these steps to collapse the footrest.
10 Installing the Bell
• Remove the screw using a Phillips head screwdriver.
• Now pull the ring open and slip the bell around the handlebar with the pull hammer facing the seat. See Figure 25.
NOTE: The bell can be placed on the left or right depending on desired position.
• Reinstall the screw securely. Pull on the bell to make sure that it is secure.
11 Steering with the Push Handle
• The push handle allows adults to steer the tricycle while pushing. See Figure 26. This push handle is height adjustable and has 4 different
heights.
• To adjust the handle height press the release button in, then align it with one of the 4 holes. Make sure the release button pops through
one of the holes. Pull up on the upper handle to be sure the handle is locked into place.
• To remove the push handle, unscrew the knob nut and pull out the knob screw.
• Next pull the push handle up and out and replace the knob screw and knob nut. See Figure 27.
• Finally close the lid on the cover cap. See Figure 28.
When the child is ready to ride and pedal the tricycle unassisted, the Push Handle
should be removed and the footrests should be folded up and out of the way.

Maintenance

All of the fittings, snaps, locks, rivets, and other hardware and plastic parts on the tricycle should be inspected periodically to ensure that
they are secured properly and not damaged or malfunctioning. The screws and nuts should also be inspected periodically to ensure that
they are secured properly and not loose or otherwise damaged. All moving parts, such as wheels and hinges should also be checked
periodically to ensure they are operating properly.
Any missing, broken, or worn components should be replaced immediately, and the tricycle should not be used until they are replaced. Only
original manufacturer's components should be used. If needed, please contact Joovy (USA) or ISSI Inc. (Canada) at our toll-free phone
number.
Color fading may occur if the tricycle is left in direct sunlight for long periods of time. When not in use, store the tricycle out of direct sunlight.
Cleaning
The plastic material on this tricycle can be cleaned using mild household soap and warm water on a sponge or clean cloth. Always allow the
plastic to completely air dry before using the tricycle.
The frame and wheels should always be kept clean and free of dirt and foreign matter, especially after operating the tricycle in rain, snow, or
other harsh environments. Use a sponge or cloth dampened with warm water and a mild household soap to clean the wheels after such use.
We want you to be completely satisfied with your purchase of this product. Should you experience any difficulty in
assembling or using this product, or if you have any questions, please contact our Customer Service Department:
UNITED STATES – Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
SATISFACTION GUARANTEED
CANADA – ISSI Inc.: (800) 667-4111, Hours 8:30 am – 5:00 pm Eastern Time.
Please log onto www.joovy.com to register your new Joovy product.
IMPORTANT NOTE: