auna Areal Bar 700 Instruction Manual page 21

Option 3: Connecting devices using OPTICAL cable.
• Connect one end of the OPTICAL cable to the
TV, DVD/Blu-ray Player or Games Console OP-
TICAL audio output socket.
• Connect the other end to the OPTC input on
the side of the Sound Bar (U10).
• NOTE: You may need to activate PCM (Down-
mix) on your source device EG:- TV, DVD/Blu-
ray Player or Games Console.
Option 4: Connecting devices using RCA-3.5mm cable
• Connect the 3.5mm (small) end of the cable to
the TV headphone 3.5mm audio output socket.
• Connect the other RED & WHITE ends to the TV
inputs on the side of the Sound Bar (U7), taking
care to match the RED plug to the RED socket
and the WHITE plug to the WHITE socket.
• NOTE: In some cases the Sound Bar volume
output is effected by the volume level on the
TV. In this case adjust the TV volume to incre-
ase the audio output from the Sound Bar. If no
sound can be heard from the Sound Bar using
this connection, you may need to check your
TV settings to enable the headphone socket
output.
Option 5: Connect an MP3 Player via audio cable
• Connect one end of the 3.5mm audio cable to
the headphone output of your MP3 player.
• Connect the other end to the AUX input (3.5mm
socket) on the side of the Sound Bar (U9).
Installation and Connections
21