Installation And Connections - auna Areal Bar 700 Instruction Manual

Prepairing the RC
Slide the battery compartment on the bottom of
the remote control open, using a fingernail. Insert a
CR2025 battery into the space taking care to match
the + and - polarity symbols correctly. Replace the
battery compartment door.
Option 1: Connecting devices using RCA audio cable
NOTE: Ensure that the TV PHONO connectors are
audio OUTPUTS and not audio INPUTS. If they are
INPUTS then use Option 4 instead of 1.
• Connect one end of the RCA cable to the TV,
DVD/Blu-Ray Player or Games Console audio
output RCA sockets.
• Connect the other end to the TV inputs on the
side of the Sound bar (U7).
• NOTE: Take care to match the RED plug to the
RED socket and the WHITE plug to the WHITE
socket.
Option 2: Connecting devices using COAXIAL cable
• Connect one end of the COAXIAL cable to the
TV, DVD / Blu-ray Player or Games Console
COAXIAL audio output socket.
• Connect the other end to the COAX input on
the side of the Sound Bar (U11).
• NOTE: You may need to activate PCM (Down-
mix) on your source device EG:- TV, DVD / Blu-
ray player or Game consoles.
20

Installation and Connections