Download Print this page

Craftsman 706.813380 Operator's Manual page 2

Advertisement

Available languages

Available languages

DANGER
A
is used to indicate a hazardous situation which,
if not avoided, witt result in serious injury or death.
WARNING
z_
indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which,
if not avoided, may result in minor injury, moderate injury,
or property damage.
CAUTtON:
Read and follow att Safety Rules and Operating
Instructions before first use of this product.
DANGER
DO NOT stand on this product. You may fall
or cause product to tip.
o DO NOT open more than one drawer. The product
may become unstable and tip.
o DO NOT step in the drawers. You may fall
or cause product to tip.
o DO NOT mount this product on a truck bed
or any other moving object.
o DO NOT move the product prior to closing
and locking all the drawers.
The drawers could come open
and make the product unstable and tip.
WARNING
Z_
oWEAR SAFETY GLASSES
when removing or
repositioning the slides.
o DO NOT putt the unit, push it when moving.
o USE THE BRAKES when not moving this product.
This wilt prevent the product from rolling.
o DO NOT alter this product in any manner.
For example, do not weld external tockbars
or attach electrical equipment.
o Keep the product on level surfaces.
The product may become unstable and tip
if stored or moved on an uneven surface.
o BE CAREFUL when closing the cover.
Remove hands before the cover closes completely.
CAUTION
o This product is not designed to be directly lifted
with a fork lift, or to be towed with any mechanical devices.
oThe maximum weight for each drawer
should never be exceeded.
o Only transport this product empty. Properly secure
when transporting.
o DO NOT exceed maximum product weight,
including contents. See Capacities for more information.
o Use adequate manpower when lifting or moving
the chest or cabinet.
Hardware and other included contents can be found in the
bottom drawer (unless otherwise noted).
Tools Required:
318" Wrench
5116" Wrench
112" Wrench
Scissors
Hardware Included:
10-24 X 5/16 HEN SCREW
(QTY: 24)
1/4-20 X 1-1/2 HEX SCREW (QTY:8)
(Included with handle pack.)
5/16-18 X 1 HEX SCREW (QTY:16)
(Only included with 36" Cabinet)
....
°
iii_
Professional
Series:
Handte Pack (Qty: 2)
Caster Pack
Drawer Liner Roll (Qty: 1)
Drawer Dividers (Qty: 6) (For the 46" cabinet dividers can be
found in the top full length drawer)
Hardware Bag
Literature
Handte Pack
Caster Pack
Drawer Liner Roll
Drawer Divider

Advertisement

loading

This manual is also suitable for:

706.0Professional series