Using Laundry Product Dispensers - Kenmore 110.28132410 Use & Care Manual

Using Laundry Product Dispensers

NOTE: Do not add single-dose laundry packets, color-safe
bleach, or fabric softener crystals to dispensers� They will not
dispense correctly�
4.
Add HE detergent
HE removable
detergent tray
Add a measured amount of HE liquid
detergent into detergent tray� This tray holds
3 oz. (89 mL). If adding powder HE detergent, remove inside
tray. Do not overfill tray – adding too much detergent may
cause detergent to be dispensed into the washer too early�
NOTE: Make sure tray is in drawer when using liquid detergent
and removed when using powder detergent� Do not go over the
Max line.
IMPORTANT: Use only High Efficiency detergents. The package
will be marked "HE" or "High Efficiency." Low-water washing
creates excessive sudsing with a non-HE detergent. Using
non-HE detergent will likely result in longer cycle times and
reduced rinsing performance� It may also result in component
malfunction and, over time, buildup of mold or mildew� HE
detergents should be low-sudsing and quick-dispersing to
produce the right amount of suds for the best performance�
They should hold soil in suspension so it is not redeposited onto
clean clothes. Not all detergents labeled as High Efficiency
are identical in formulation and their ability to reduce suds�
For example, natural, organic, or homemade HE detergents
may generate a high level of suds� If you use one of these
and see an "F0E2" error code appear in the display, consider
using a different HE detergent. Always follow the detergent
manufacturer's instructions to determine the amount of
detergent to use. Do not go over the Max line on the dispenser.
HELPFUL TIP: See "Washer Maintenance" for information on
the recommended method of cleaning washer dispenser trays�
5.
Add liquid chlorine bleach to dispenser
Liquid
Chlorine Bleach
Do not overfill, dilute, or use more than 1 cup (236 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach�
10
6.
Add liquid fabric softener
or Oxi to dispenser
Fabric softener tray
Pour a measured amount of liquid fabric softener
or Oxi-type boosters into tray; always follow
manufacturer's directions for correct amount of
fabric softener or Oxi based on your load size.
Close dispenser drawer, then select TimedOxi
and/or Fabric Softener option. Oxi is added
during main wash and Fabric Softener is added during rinse�
IMPORTANT: TimedOxi and/or Fabric Softener option must
be selected to ensure proper distribution at correct time in
cycle. Do not overfill or dilute. Overfilling dispenser will cause
fabric softener to immediately dispense into washer�
If Two Rinses option is selected, fabric softener will be
dispensed into the last rinse�
It is normal for a small amount of water to remain in the
dispenser at the end of a cycle�
7.
Touch Power button to turn on washer
Make sure the dispenser drawer is closed completely, then
touch the Power button to turn on the washer� Other methods
of turning the washer on include opening the lid or turning
the Wash Cycle knob�
Oxi tray