Advertisement
Available languages
Available languages
Description
Setting
Brightness threshold
Min. =
Night detection only
Max. =
Day and night detection
Operation
This device enables the automatic remote control
of a light source by movement detection in its
surveillance area.
The control is radio transmitted to a receiver
linked during the learning
(1)
of a scenario
It can be bound to a lighting level.
(1) Learn phase: action of linking products to be
controlled simultaneously from a central point.
This linking is performed by applying the
scenario learning procedure on page 13.
(2) Scenario: corresponds to all the products
(actors) that are linked to a control key.
11
Battery replacement
(2)
.
1.5 V AA alkaline battery (take care to ensure correct polarity).
To ensure the product functions properly, change the battery
every 2 years.
12
LEARN key
When pressed twice,
the LEARN key
acts as a control key
Communication media
RF => Radio Frequency
Identification No.
LEARN indicator
Time delay setting
1 second to 16 minutes
Advertisement
