Installation; Charging The Battery Pack; Selecting A Location - Sanyo CLT-9920 Instruction Manual

900-mhz digital spread spectrum cordless telephone
Hide thumbs Also See for CLT-9920:
Table of Contents

Advertisement

CLT9920 (SANYO) A5 2nd

Charging the Battery Pack

The connectors will fit together only one
way. Make sure the battery's connector
is properly aligned. Use only the SANYO
battery pack (3KR-600AAL or GES-
PCF01).
TALK/BATT LOW
Rechargeable batteries have a memory
effect that reduces standby and talk
time. To avoid this memory effect, on a
monthly basis use the phone until the
low battery indicator appears. Then
charge the battery for 15 hours.
Repeated short chargings may cause
memory effect in the handset battery. It
is recommended not to replace the
handset to the base after each call.
6/29/00
10:06 AM

Installation

BLACK
RED
E3
Page 4

Selecting a Location

A continuous power outlet is an AC
outlet which does not have a switch
to interrupt its power.
: Do not place the power
cord in an area where it may create a
trip hazard or become chafed and
create a fire or electrical hazard.
Setting the Dialing Mode Switch
TONE
PULSE
RECYCLING NICKEL-CADMIUM BATTERIES
NICKEL-CADMIUM
BATTERIES MUST BE
DISPOSED OF
Ni-Cd
PROPERLY.
Nickel-cadmium cells are used in the battery
pack. Please take your used nickel-cadmium
battery packs to a store that recycles
nickel-cadmium batteries.
PULSE TONE

Advertisement

Table of Contents
loading

Table of Contents