Audio Adjustments; Introduction Of Audio Adjustments; Compensating For Equalizer Curves (Eq-Ex); Using Balance Adjustment - Pioneer Super Tuner III D DEH-P5800MP Operation Manual

Section
08

Audio Adjustments

Introduction of audio
adjustments
1 Audio display
Shows the audio adjustment status.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
Fad (balance adjustment)EQ (equalizer
curve adjustment)Bass (bass and treble
level adjustment)Loud (loudness)
Sub-W1 (subwoofer on/off setting)/NonFad
(non fading output on/off setting)Sub-W2
(subwoofer setting)/NonFad (non fading out-
put setting)HPF (high pass filter)SLA
(source level adjustment)
# If EQ-EX function has been selected and only
when EQ-EX is turned on and Custom is selected
as the equalizer curve, you can switch to Bass.
# When the subwoofer controller setting is
PREOUT:FULL, you cannot switch to Sub-W1.
(Refer to page 41.)
# You can select the Sub-W2 only when sub-
woofer output is turned on in Sub-W1.
# When the subwoofer controller setting is only
PREOUT:FULL, you can switch to the nonfading
output on/off setting. (Refer to page 41.)
# You can select the nonfading output setting
only when nonfading output is turned on in the
nonfading output on/off setting.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.
34
En
All manuals and user guides at all-guides.com
1
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Compensating for
equalizer curves (EQ-EX)
The EQ-EX function accentuates the effects of
each equalizer curve. Furthermore, you can
adjust bass and treble for each source when
Custom curve is selected.
% Press and hold SW to turn EQ-EX on.
EQ-EX ON appears in the display. EQ-EX is
now on.
# To turn EQ-EX off, press and hold SW.
# If you do not operate the EQ-EX within about 8
seconds, the display automatically returned to
the source display.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select Fad.
Press AUDIO until Fad appears in the display.
# If the balance setting has been previously ad-
justed, Bal will be displayed.
2 Press a or b to adjust front/rear speak-
er balance.
Each press of a or b moves the front/rear
speaker balance towards the front or the rear.
Fad F 15  Fad R 15 is displayed as the front/
rear speaker balance moves from front to rear.
# Fad F/R 0 is the proper setting when only two
speakers are used.