Maintance; Troubleshooting - Pro's Pro Electronic SX-01 User Manual

7. Maintenance
1. The Electronic SX-01 stringing machine is adjusted and calibrated before
shipment. Working is easy and relatively maintenance-free.
2. Keep the stringing machine always at a dry and safe place. Keep it away
from dust, grease, moisture and any type of heat.
3. Clean the dust and other dirt with a soft cloth or brush.
4. Water should never come inside the machine!
5. Do not use liquid cleansers, abrasive cleaners or aerosol cleaners.
6. Use fine emery cloth to remove the wax buildup from the jaws of the
clamps and the string gripper.
7. Do not uses sandpaper to remove the wax buildup; it will destroy the
special finishing.
8. Do not lubricate the tracks of the turntable.
9. Do not use penetrating oils to clean or to lubricate.
10. Check the clamps often to be sure that they hold the string properly. I not
adjust them as shown before.
11. Reset the tension setting to 10 kilograms after stringing.

8. Troubleshooting

The power light does not shine and the electronic part does not do anything.
Be sure the power switch is in "on" position.
Check that the power cord is properly installed.
Check the fuse. Turn off the power switch and unplug the power cord
from the wall outlet before checking the fuse. The fuse housing is next to
the power switch.
Check the wall outlet with another electronic equipment.
Page 8