Mounting A Racket - Pro's Pro Electronic SX-01 User Manual

7. If the engine doesn't stop pulling automatically, press the backwards
button.
8. After stringing turn the machine off.
9. Turn the tension on the display down to 10 kilogram the tension in the
machine should be as low as possible in the time of not stringing.
4. Fixing of the Racket
Loosen both mounting stocks, place the four K-shaped side supports into the
hole of the side-support arms, in the far outer hole for tennis rackets, in the other
hole for badminton and squash. Now place the racket in the middle of the
stringing machine. Ensure that the two swivel clamps can reach all of the racket
area for stringing.
Never apply excessive force or over-tighten the mounting stock locking knobs,
this will damage the parts.
Tighten now the side support arms and the mounting stock, but be careful not to
do this too heavily, that the racket will not be deformed.
Page 6