Rear Panel Overview - TC Electronic P2 Level Pilot Administrator's Manual

Power Input Balanced
100 - 240V Analog
Inputs
Power Switch XLR
RS232 : For connecting to a PC. Use a standard 9 pin Sub D cable. (Supplied)
GPI In : Use standard stereo 1/4" jack. (not supplied)
BNC : Use standard shielded 75 Ohm Coax cable with BNC connectors. (not supplied)
XLR to XLR
8
REAR PANEL
Balanced BNC
Analog Sync In
Outputs
XLR
AES/EBU S/PDIF
Input/ Input/
Output Output
XLR to Jack
Stereo
RS 232 GPI IN
9 pin Sub D