Table of Contents
Advertisement
Assemble Display Bracket
1.
Slide the fixed TV brackets onto each end of the Horizontal Mounting Bars (Figure 2).
Mount Display Bracket to Display Panel
1.
Place the assembled Display Bracket on the back of the display with one Adapter Bracket aligned with a set of vertical
mounting holes (Figure 3).
2.
Slide the other Adapter Bracket in or out until it aligns with the second set of vertical mounting holes.
NOTE: The Adapter Plate should be horizontally centered on the back of the flat panel display.
NOTE: There are eight positions for flexibility. Move the Adapter Brackets to desired location. Adapter Brackets can be
flipped around (if required).
3.
Attach the Adapter Brackets using four mounting bolts (D - H) and four washers (L or M).
NOTE: Bolt size will depend on thread pattern and hole depth of the flat panel being installed.
4.
Once aligned, tighten all screws down with a Phillips Head Screw Driver.
Bolts (D – H)
(size depends on display)
Horizontal Mounting Bars
Display Bracket Assembly
Bolts (pre-installed)
Adapter
Plate
Figure 2
Lock screw to bottom of arms.
Figure 3
5
Fixed TV Bracket
(L or M)
Display Back
Advertisement
Table of Contents
