4. Remove retaining rings (B) with installation tool (B1), see Fig. [6]. 5. Detach wall plate (B2). Application 6. Insert mounting plug (C1), see Fig. [7]. In order to ensure correct operation, a pressure of at least 0.7 bar is necessary at the shower system.
Adjustment Shut off cold and hot water supply. Temperature adjustment, see Figs. [13] and [14]. II. Thermostatic cartridge, see fold-out page VI, Fig. [17]. • Before the mixer is put into service if the mixed water temperature 1.Lever out cap (J1). measured at the point of discharge varies from the specified temperature set on the thermostat.
Need help?
Do you have a question about the Aquatower 1000 and is the answer not in the manual?
Questions and answers