Engine lubrication
Lubrication oil pressure during ope
ration (depends on engine speed,
oil temperature and engine load)
Oil filter
Oil capacity in oil sump (litres)
half deep
Oil change quantity (with filter)
Engine cooling system
Coolant temperature
Inlet temperature
Outlet temperature
Coolant filling capacity
Electrical equipment
Starter
Test values
Lambda (oxygen)
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Force feed lubrication
must be monitored via an oil pressure monitor or a display device
Single-use main flow filter (easy-change filter)
min.
max.
24 l
34 l
35 l
Liquid cooling
min. 80_C
max. 88°C
in engine approx. 16 l
24 V; 4 KW
Natural gas operation
Technical Data
Biogas operation
1.6
1.4
77