Abus FUBW50110 Installation Instructions And User Manual page 27

Surveillance area:
The following diagrams show the region captured by the detector.
Horizontal
FUBW50100
Vertical:
FUBW50100
For optimal detection, the detector should be mounted at a height of 180–220 cm.
Step 2: Installing the motion detector
• Open the housing by removing the screw on the bottom of the detector and taking off the
front housing panel.
• Insert the AA batteries provided, ensuring the polarity is correct.
• Remove the insulation sheet after the batteries have been inserted.
• Mount the detector as described in step 1 either on the wall or in the corner. To do this, use
the holes provided on the rear housing panel.
• Only use corresponding dowels and screws for the installation.
FUBW50110
FUBW50110
Installation
27 | E N