Information Before You Start; Starting / Stopping The Engine - Stihl MS 192 T Instruction Manual

English
Chain brake maintenance
The chain brake is subject to normal
wear. It is necessary to have it serviced
and maintained regularly by trained
personnel. STIHL recommends that you
have the maintenance and repair work
performed by a STIHL servicing dealer
at the following intervals:
Full-time professional
users:
Semi-professional
users (in agriculture
and construction):
26
Information
Before You Start
0 = Engine off –
ignition is switched off
every 3
# = Normal run position –
months
engine runs or can fire
n
=Starting throttle position –
this position is used to start the
every 6
engine. The Master Control lever
months
moves to the normal run position as
soon as the throttle trigger is
squeezed.
To move the Master Control lever from #
n
to , press down the throttle trigger
interlock and squeeze the throttle trigger
at the same time.
Starting / Stopping
the Engine
Starting the engine
Observe safety precautions – see
chapter on "Safety Precautions".
: Press the fuel pump bulb at least
five times – even if the bulb is
already filled with fuel.
MS 192 T