GE GTD72GBPNDG Owner's Manual page 14

Troubleshooting Tips... Before you call for service
Problem
Static occurs No fabric softener was used
Overdrying
Synthetics, permanent press
and blends can cause static
Collars and The dryness monitor senses
waistbands still that the body of the clothes
wet at end of is dry
cycle
Slight variation This is normal
in metallic color
Dryer continues Wrinkle Care was selected
to tumble after
display says
Complete
Door is too Steam condenses on inner
foggy to see door
clothes during a
steam cycle
Water seen on Steam condenses on these
inside of door surfaces
and top of lint
filter when
opening door
after steam
cycle
Small areas Steam condenses on inner
on clothes are drum
damp after
steam cycle
Small amount of Inadequate load size for
water on floor in steam cycle selected, excess
front of dryer steam condenses inside
cabinet and leaks out
Water on floor in Loose water hose connection
back of dryer
Hose missing rubber washer
at connection with valve
Water drips Steam condenses on inner
from door when door
opened after a
Steam Cycle
Cannot see Steam released at different
steam at times in the cycle
beginning of
cycle
Cannot see The steam nozzle might be
steam during clogged with debris from your
cycle water supply
Garments still Too many garments
wrinkled after
steam cycle
Garments still Lint filter not clean
wrinkled after
Load is children/infant
steam cycle
garments
14
Possible Causes What To Do
Try a fabric softener.
Bounce Fabric Conditioner Dryer Sheets have been approved for
®
use in all GE Appliances dryers when used in accordance with the
manufacturer's instructions.
Try a fabric softener.
Adjust setting to Less Dry or Damp.
Try a fabric softener.
Choose QUICK DRY or TIMED DRY to dry damp collars and
waistbands. In the future, when drying a load with collars and
waistbands, choose More Dry.
Due to the metallic properties of paint used for this unique product,
slight variations of color may occur due to viewing angles and
lighting conditions.
Ensure Wrinkle Care option is not selected. For the Steam
Refresh cycle, Wrinkle Care will automatically be turned on
and cannot be turned off.
This is normal.
This is normal.
If using the STEAM Dewrinkle cycle, manually reduce the cycle
time. If using the STEAM Refresh cycle, add more garments to
the load.
If using the STEAM Dewrinkle cycle, manually reduce the cycle
time. If using the STEAM Refresh cycle, add more garments to
the load.
Tighten connection.
Install rubber washer provided with hose.
This is normal.
This is normal.
Call GE Appliances at 877.959.8688 to order nozzle
replacement kit WE25M71 or to request a technician to replace
this for you.
Load fewer garments; manually increase time.
Clean lint filter
Use the Steam Refresh cycle
49-3000198-1