Operation And Verification - Netstor HercuLes HL23T-PRO User Manual

7. Operation and Verification

7.1 macOS
1. Connect HL23T-PRO chassis with power source, and then connect Netstor
chassis and Thunderbolt computer with Thunderbolt 3 cable.
2. The HL23T-PRO enclosure is designed to be powered on/off simultaneously
with Thunderbolt host computer when Netstor unit is connected to computer
by Thunderbolt cable. Therefore, power on computer first, and then Netstor
unit will be powered on automatically.
(HL23T-PRO also supports hot-plug and hot-unplug for powering on and off)
9
Go Top ↑