Front Panel - Tascam US-144 Owner's Manual

r
LINE OUT L/R jacks
unbalanced) These are analog stereo output
jacks.
t
DIGITAL IN jack
nector that inputs a stereo S/PDIF digital
signal.

Front panel

u
MIC IN (L, R) jacks
These are analog mic input jacks. The wir-
ing is as follows: pin 1 = ground, pin 2 =
hot, pin 3 = cold.
i
LINE IN (L, R) jacks
jacks) These are balanced line input jacks.
The R channel also accommodates guitar
input. If the top panel
select switch is in the
2 – Parts of the US-144
(RCA connector,
This is an RCA con-
(XLR balanced)
(TRS 1/4" phone
-
MIC/LINE GUITAR
position, the
GUITAR
y
DIGITAL OUT jack
connector that outputs a stereo S/PDIF dig-
ital signal.
NOTE
The US-144's DIGITAL IN/OUT jacks
allow simultaneous input and output at
24-bit/96 kHz.
R jack operates as an unbalanced input
jack for guitar.
If the
MIC/LINE-GUITAR
the position, the R jack operates
MIC/LINE
as a balanced input jack. (Sleeve = ground,
tip = hot, ring = cold)
o (stereo 1/4" phone) This
PHONES jack
is a headphone output jack.
This is an RCA
select switch is in

TASCAM US-144