GE IM-5D Owner's Manual & Installation Instructions page 6

Installation Instructions
PREPARE FOR INSTALLATION
1
Pull the freezer door open to full extension.
bottom on each side of the freezer door using
3/8" hex socket driver.
CAUTION
secure the door before lifting.
disengage it from the
slide mechanism
The door can safely rest
on the bottom. Do not
rest the door on any
other surfaces to avoid
scratches.
2 REMOVE FREEZER DRAWER
extending the drawer then lifting up and out.
Push the bottom
basket back
until the slide
mechanism self
retracts.
6
INSTALLING THE ICEMAKER
Lifting Hazard
CHECK FOR ICEMAKER WATER
3
LINE
icemaker water line exists,
discard the following items
-icemaker water line assy
-coupler
-plug
-dual valve and water line assy
"
fill tube", remove the sticker and continue with
ACCESS WIRE HARNESS
4
Find the wire harness access cover in the
back left portion of the top of the freezer.
cover. Throw cover away.
The wire harness is tucked inside the pocket.
Pull the connector down for access.
water line
49-60807 Rev. 3