Quick Start; Typical Ti Plug-N-Play Platform Jumper And Switch Settings For The Tpa152 Evm - Texas Instruments TPA152 User Manual

The steps in this chapter can be followed to quickly prepare the TPA152 audio
amplifier EVM for use. Using the TPA152 EVM with the TI Plug-N-Play Audio
Amplifier Evaluation Platform is a quick and easy way to connect power, signal
and control inputs, and signal outputs to the EVM using standard connectors.
However, the audio amplifier evaluation module can be used stand-alone by
making connections directly to the module pins, and can be wired directly into
existing circuits or equipment.
The platform switch and jumper settings shown in Table 2–1 are typical for the
TPA152 EVM and will cause the TPA152 IC to mute when a plug is removed
from platform headphone jack J10.
Table 2–1. Typical TI Plug-N-Play Platform Jumper and Switch Settings for the TPA152
EVM
Notes:
Topic
2.1
2.2
2.3
EVM JP6 JP7
TPA152 X Lo
1) X = Don't care
2) Set S2 to ON when signal conditioning board is installed in U1; set S2
to OFF when no signal conditioning board is installed.
Precautions
Quick Start List for Platform
Quick Start List for Stand-Alone
Chapter 2

Quick Start

JP8 S2 S3
X Note 2 U5
Quick Start
Page
2–2
2–3
2–4
2-1