Remote Controllers For The Tascam Mmp-16 - Tascam MMP-16 Owner's Manual

Remote Controllers for the Tascam MMP-16

Tascam MM-RC The TASCAM MM-RC is a dedicated remote control unit designed specially for
use with the MMP-16 and the MMP-16 sixteen channel player unit. It connects to a
special remote connector on the UI/B card on the back of the MMR and MMP
units. This remote allows complete control of all attached functions of the MMR
and MMP units, including all setup menus. It also allows for machine grouping as
well as system wide control of all attached units. A total of up to 100 units (any
combination of MMR and MMP) can be controlled from the MM-RC.
Lynx KCU The TimeLine Lynx Keyboard Control Unit (KCU) is a tabletop controller which is
typically used in conjunction with Lynx 2 synchronizer modules. It provides a time
code display, motion control functions (including a jog/shuttle Wheel), track
selections, and audio editing functions for most professional video and audio
transports. The KCU can remotely control the operation of a total of up to six
transports including MMP-16s. When used with the KCU 900 software, the Lynx
KCU unit allows control of the following MMP-16/MMR-8 functions:
The Lynx KCU may be directly connected to either of the two integrated Lynx
ports on the MMP back panel. The second Lynx connector provides a loop thru
connection to an external Lynx module for control of other devices from the KCU.
The TimeLine Lynx KCU is available from:
TimeLine Vista, Inc.
1755 La Costa Meadows Drive, Suite B
San Marcos, CA 92069
Tel: (760) 761-4440 Fax: (760) 761-4449
MMP-16 Tascam MMP-16 Owner's Manual • Chapter 2 • Installation
Transport Control
Track Record Arm/Select (Record arm only for MMR-8)
Slip Track/Region
Undo/Redo
Goto Prev/Next Edit
Goto Head/Tail
Clear/Paste
29