Advanced Operations - Panasonic SC-HTB510 Operating Instructions Manual

█ To adjust the subwoofer level
Press [SUBWOOFER +] or [SUBWOOFER ‒] to
adjust the level.
Indication
Note:
By default, the subwoofer is set at level 3.
█ To set the surround mode
Press [SURROUND] repeatedly.
Mode
On
(default)
Off
Note:
The indicator for the selected setting blinks for 5 seconds and
then exits the setting mode.
18
Effect levels
5 Highest
4
3
2
1 Lowest
Indication

Advanced operations

Dual audio
Sets the preferred audio channel mode when there
are two audio modes received by this system.
Press and hold [MUTE] for a minimum of
4 seconds.
Audio mode
Main
(default)
Secondary
Main +
Secondary
Note:
•
This effect only works if the audio output of the TV or player
is set to "Bitstream" and "Dolby Dual Mono" is available in
the sound source.
•
The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
Audio format
You can view the current audio format.
Press [SOUND], [MUTE], [SOUND] and [MUTE]
consecutively.
Press within 3 seconds between each button.
Audio mode
Dolby Digital
DTS
®
PCM
Note:
•
The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
•
The indicators may work differently if the main unit detects
an unsupported audio format from the connected TV.
•
This function does not work when "
as the source.
Indication
Indication
" or "NET" is selected