Connecting To Registered Mobile; Phones - Sony nav-u Series Manual

Notes
• While connecting to a mobile phone, this
unit cannot be detected from another
mobile phone. To be detected, disconnect
the current connection and search for this
unit from another mobile phone.
• Depending on the model of your mobile
phone, searching from this unit may not
be possible. In this case, search for this
unit from the connecting mobile phone.
• If you search for this unit and the
connecting mobile phone mutually at the
same time, this unit will not recognize the
connecting mobile phone.
• It may take time to search or connect.
• Depending on the model of your mobile
phone, the confirmation display of the
connection appears before inputting the
passkey.
• The time limit for inputting the passkey
differs depending on the model of your
mobile phone.
• Although this unit can be paired with up to
8 mobile phones without inputting a
passkey, some mobile phones may
require the input of passkey.
• This unit cannot be connected to a mobile
phone that supports only HSP (Head Set
Profile).
Connecting to registered
mobile phones
Mobile phones are registered once
paired and connected with this unit.
When the unit is turned on, the last
connected mobile phone is
automatically connected. To connect
with another registered mobile phone,
do the procedure below.
1
Touch "Phone" in the top
menu.
2
Select "Phone Settings" c
"Connect phone" c "New
registration."
3
When "Search for Phone"
appears, select "OK."
The list of registered mobile phones
appears.
4
Select the mobile phone to
connect.
"Connected" appears and
connection is complete.
Depending on the model of your
mobile phone, the connection may
also require an operation on the
mobile phone.
continue to next page t
9