Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
5 − Reference and specifications
Specifications
Track System
Heads Construction
Tape Speed
Pitch Control
Fast Winding Time
Motor
Wow and Flutter
Frequency Response (Overall)
Metal tape (Type IV, playback only)
Chrome tape (Type II)
Normal tape (Type I)
Signal to Noise Ratio (Overall)
Line Input (RCA jack)
Mic Input (mono 1/4" Phone jack)
Line Output (RCA jack)
Headphones Output (stereo 1/4" Phone jack)
Power Requirements
U.S.A./Canada
U.K./Europe
Australia
Power Consumption
Dimensions (including protruding parts)
Weight
Dimensional drawing
4-track, 2-channel stereo
Record/playback head x 1 (each deck)
Erase head x 1 (each deck)
4.8 cm/sec
9.5 cm/sec (high-speed dubbing mode)
±12%
approximately 110 sec (C-60 tape)
DC servo motor (capstan)
0.09% (WRMS) ±0.1%
30 Hz-19 kHz
30 Hz-18 kHz
30 Hz-17 kHz
58 dB (Dolby NR OFF, nominal recording level)
69 dB (Dolby NR ON, CCIR-ARM)
100 mV (input impedance 50k ohms)
0.38 mV (input impedance 200k ohms)
0.46 V (load impedance 50k ohms or more)
1 mW/32 ohms
120 V AC, 60 Hz
230 V AC, 50 Hz
240 V AC, 50 Hz
22 W (U.S.A./Canada)
22 W (U.K./Europe)
22 W (Australia)
482 (W) x 138.5 (H) x 286 (D) mm (18.95" x 5.45" x 11.26")
5.5 kg (12.13 lb)
482mm (18.98")
466mm (18.35")
435mm (17.13")
265mm (10.43")
15mm
(0.59")
TASCAM 202
6mm (0.24")
IV
MK
Advertisement
Table of Contents
