Home Page; System - Planet ICA-110 Manual

2. Start WEB browser on one of the PCs in the same LAN segment.
3. In the Address box, enter "http://" and the IP Address of the Internet Cam-
era, as in this example, which uses the Internet Camera's default IP Address:
http://192.168.0.20
If you have difficulties on entering the web interface by the default IP
address, press Internet Camera's reset button continuously for three
seconds or till power LED begins to light up. Then the camera will reset

Note:
to factory default. No password and username are required in default
setting. It is strongly suggested that change the password and username
for security purpose.

Home Page

After you connect to the Internet Camera via web browser, the Home Page will appear.

System

Select "System Administration" to configure Internet Camera. There are many settings
to configure the Internet Camera in the system menu bar. Please select "Network" related
page to setup Internet Camera network environment.
5