Care & Cleaning - Sage the Soft Top Pure Series Quick Manual

CARE & CLEANING
Always switch 'off' at the power outlet and
unplug the appliance from the power outlet
before cleaning.
REMOVABLE FILTER
The kettle features a removable mesh filter
to remove scale deposits for cleaner water.
To remove the scale deposits from the filter,
open the lid and slide the filter up and out
of the kettle.
The filter can be cleaned by running under
hot water and rubbing with a cleaning cloth or
brush. To replace filter, simply slide the filter
down into the slot behind the spout of the
kettle and push back into position.
NOTE
The filter could become damaged with
time. Please check regularly and replace
if found damaged.
NOTE
The concealed element in the base of
the kettle is made from high quality
stainless steel.
Any brown stains appearing are the result
of mineral deposits and are not rust.
8
DESCALING
It is essential that regular descaling takes
place. Frequency will depend on the usage
of the kettle and the hardness of the water in
your area. A build-up of scale may cause the
inside of the kettle to discolour and ultimately
may damage the element. This will affect the
efficiency of the appliance and may invalidate
the warranty agreement. We recommend the
use of Sage "the Descaler" as it's specially
®
formulated for descaling kettles. To order visit
www.sageappliances.com
WARNING
Causes skin irritation. Wash hands thoroughly
after handling. Wear protective gloves/protective
clothing/eye protection/face protection.
1. Empty one sachet (25g) into 1 litre
of warm water, stir to dissolve.
2. Pour into the kettle.
3. Leave stand for 5 minutes.
4. After 5 minutes, discard the solution.
5. Rinse the kettle with fresh clean water.
TO CLEAN THE EXTERIOR
The outside of the kettle may be wiped over with
a damp cloth and polished with a soft dry cloth.
NOTE
Do not use chemicals, alkaline cleaning
agents, steel wool or abrasive cleaners
to clean the inside or outside of the kettle.
Use a mild cleaning agent with a soft
damp cloth.
STORAGE
Ensure the kettle is switched off, clean and
dry before storing. Ensure the lid is closed and
locked securely into place. Wrap the power cord
around the cord storage under the power base.
Stand the kettle upright on the power base.
Do not store anything on top.