Connection; Illuminator Masters The Camera; Camera Masters The Illuminator - Bosch IIR-50850 Installation Note

6 en | Connection
3

Connection

3.1 Connecting the IIR-50xx0
Power
–
Notice!
Make sure the unused wires are not connected to each other.

Illuminator masters the camera

To use the light sensor in the illuminator to switch the day/night function of the camera:
1.
2.

Camera masters the illuminator

To control illuminator switching from the camera:
1.
2.
9.2018 | 2.2 | AM18-Q0715
WH
{
1
2
YE
GN
{
3
4
BU
5 RD
+
-
6
BK
To power the illuminator, connect a 12 to 32 VDC or a 24 VAC supply from a SELV class 2
power supply to wires 5 (+ red) and 6 (- black).
Connect wires 1 (+ white) and 2 (- yellow) to the alarm input of the camera.
If required, adjust the Photocell adjust control to determine the switching points of the
illuminator.
Turn the Photocell adjust control fully counterclockwise.
Connect a relay output from the camera to wires 3 (- green) and 4 (+ blue).
Installation note
IR Illuminator 5000
Bosch Security Systems B.V.