Changing The Beam-Angle Filter - Bosch IIR-50850 Installation Note

IR Illuminator 5000

Changing the beam-angle filter

Insert a beam-angle filter as follows:
1.
IIR-50xx0-SR
2.
3.
4.
5.
Bosch Security Systems B.V.
Insert the supplied tool into the slot and twist. (Use the thick end for the IIR-50xxx0-SR
illuminator; use the tapered end for all other illuminators.)
IIR-50xx0-MR/LR/XR
NIR-50xx0-MRP
Remove the top cover.
Peel back the protective foil from the adhesive points.
Attach the selected beam-angle filter with the label side up to the adhesive points.
"click"
Click the top cover back into place.
Installation note
Installation | en 5
9.2018 | 2.2 | AM18-Q0715