Grundig TA 7280 Instruction Manual page 20

OPERATION­______________________________
4­­ D isconnect the appliance from the wall
socket.
Warming­up­already­
toasted­bread
1­­ F ollow the steps from 1 to 4 of the "Toasting"
section.
2­­ P ress the reheat button
– The indicator lights of the reheat button
and stop button
D
warming up process begins.
3­­
T he appliance automatically switches off as
soon as the set degree of warming has been
reached. The start lever
heat button and the stop button
D
off. The toast slices are pushed upwards and
can be taken out of the toaster.
Notes
To cancel the toasting process before it has fin-
7
ished, press the stop button
springs back up and the toast slices can be
B
taken out of the toaster.
After the start lever
7
can use high-lift function by pushing the start
lever upwards.
B
Caution
Be very careful when taking the toast slices out
7
of the toaster as the metal parts of the toaster
and also the bread can become very hot.
4­­ D isconnect the appliance from the wall socket.
Warming­up­buns
This toaster is equipped with an external warm-
ing rack .
I
Notes
Do not toast bread and warm up buns at the
7
same time.
Do not warm up toast slices on the warming
7
rack . The toast slices hinder sufficient ven-
I
tilation.
20 ENGLISH
.
D
illuminate and the
F
springs back up; re-
B
lights go
F
. The start lever
F
springs back up, you
B
If you accidentally activate the wrong mode
7
(defrost instead of reheat or reheat instead of
defrost), then the selected mode must be can-
celled first by pressing the stop button
fore you can select the right mode.
1­­
P ut the warming rack on the housing
place it into the gaps
2­­
P lace the buns on the warming rack
3­­ C onnect the power plug into the wall socket.
4­­ U sing the browning control
sired degree of warming.
5­­ P ress down the start lever
– The indicator light of the stop button
luminates and the warming up process be-
gins.
6­­
T urn the buns in order to reach a consistent
browning.
7­­
T he appliance automatically switches off as
soon as the set degree of warming has been
reached.
– The start lever
B
stop button light goes off.
F
Note
To stop the warming up process before it has
7
finished press the stop button
8­­ A fter warming up the buns take them off the
rack and and put the warming rack by the
warming rack handles off.
9­­ D isconnect the appliance from the wall socket.
Caution
The buns and the housing
7
become very hot during and directly after the
toasting process. Do not touch them with bare
hands.
F
and
H
.
I
select the de-
C
.
B
F
springs back up; and the
.
F
of the toaster can
H
be-
il-