auna KR-140 Manual page 28

EN
28
button to confirm the minute time set and go for CT on/off set, the "Ct
On" or "Ct OF" will blinking;
• Rotates again the "Adjustment (16)" button to " -" or "+ " for selecting
the "Ct On" or "Ct OFF" as you desired;
• Short press again the"Adjustment (16)"button to confirm.
• The clock set adjustment is completed and clock time is showing on
LED display.
Information for CT on/off function:
• By design, the BT Kitchen Clock Speaker will be sync once the clock
time at 2:00 (AM) by every mid night. This function is for keeping the
clock time is up-to-date.
• The CT function for clock's time sync can be turn off and on as you
desired, however clock's time cannot be sync and update when it is in
disabled mode.
Alarm 1 / Alarm 2 and Wake-Up function
Alarm time set
• Short press the "ALARM (13)" button to entry the set alarm function, first
the Alarm 1 symbol ( ) will blinking.
• Then short press the "ALARM (13)" button again can switch to when
you want; (Short press this button can switch in between
repeatedly.)
Set Alarm 1 for example
• Short press the "ALARM (13)" button to choose
• Then short press the "Adjustment (16)" button to confirm and go for set
alarm's hour, and the number of alarm hour will blinking;
• Rotates the "Adjustment (16)" button to " -" or "+ " for selecting the
desired hour of Alarm 1. Short press the "Adjustment (16)" button to
confirm and go for set minute of Alarm 1. The number of minute will
blinking.
• Then again, rotate the "Adjustment (16)" button to " -" or " +" for
selecting the desired minute of Alarm 1 and short press the "Adjustment
(16)" button to confirm and go for choose wake-up source. The "bU"
letter will blink on LED display.
• Rotate the "Adjustment (16)" button to position " -" or " +" for choosing
"bU" or "tU" which as want. The wake-up source could switch from "bU"
to "tU" repeatedly if continually rotates it button to " -/+ "
and
.