Clock Functions - Electrolux EVY7800AA User Manual

7. CLOCK FUNCTIONS

7.1 Clock functions
Symbol
If you set the time for a clock function, the
time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90% of the set time.
The appliance uses the residual
heat to continue the cooking pro-
cedure until the time ends. The re-
sidual heat can last from 3 to 20
minutes.
Setting the clock functions:
1.
Set a heating function.
2.
Touch
display shows the necessary clock
function and the related symbol.
3.
Touch
time. Touch OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4.
Touch a sensor field to stop the sig-
nal.
Useful information:
• With Duration and End Time , the appli-
ance deactivates automatically.
• With Duration and End Time , you must
set the heating function and the tem-
perature first. Then you can set the
clock function.
• You can use Duration and End Time at
the same time if you want to automati-
Function
To set a countdown (maximum: 2 hours, 30 mi-
nutes). This function has no effect on the operation
of the appliance. You can also activate it when the
Minute Minder
appliance is deactivated. Touch
function. Touch
OK to start.
To set the length of an operation (maximum: 23
Duration
hours, 59 minutes).
To set the switch-off time for a heating function
End Time
(maximum: 23 hours, 59 minutes).
again and again until the
or to set the necessary
Description
or to set the minutes and
cally activate and deactivate the appli-
ance at a given time later.
7.2 Heat + Hold
The Heat + Hold function keeps prepared
food warm at 80 °C for 30 minutes. It ac-
tivates after the baking or roasting proce-
dure ends.
• You can activate or deactivate the func-
tion in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80
°C.
– The function Duration is set.
Activating the function
1. Activate the appliance.
2. Select the heating function.
3.
Set the temperature above 80 °C.
4.
Press again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function stays on if you
change the heating functions.
7.3 Extra Time
The Extra Time makes the heating func-
tion continue after the Duration ends.
• It is applicable for all heating functions
with Duration or Weight Automatic.
ENGLISH 17
to activate the