Disinfection (Optional) - Philips AVENT SCF334 Manual

Bottle parts:
- Philips Avent Natural bottle
- Dome cap
- Screw ring
- Teat
- Sealing disc
Accessories
- Manual breast pump converter
- Handle
- Silicone diaphragm with stem
Supplies needed for cleaning:
Washing in sink
- Mild dishwashing liquid
- High quality drinking water
- Soft brush or clean dish towel
- Clean sink or bowl
Warning: Do not use antibacterial or abrasive cleaning agents when you are
cleaning.
1 Disassemble the breast pump and bottle completely. Also remove the white valve from the
breast pump.
Caution: Be careful when you remove the white valve and when you clean it. If it gets
damaged, your breast pump does not function properly. To remove the white valve,
gently pull at the ribbed tab on the side of the valve.
2 Wash the parts in the sink or dishwasher.
Washing in sink: Detach all parts and soak for 5 minutes in hot water with some mild
dishwashing liquid. Clean all parts with a soft brush or clean dish towel and then rinse
them thoroughly (Fig. 3).
Washing in dishwasher: Clean the parts, except the motor unit, the silicone tube and cap
and the adapter, in the dishwasher (on the top rack only).
Note: To clean the valve, rub it gently between your fingers in warm water with some
washing-up liquid. Do not insert objects into the valve, as this may cause damage.

Disinfection (optional)

After cleaning, if you also want to disinfect, you can boil the parts in water in a household pot.
Washing in dishwasher
- Mild dishwashing liquid/tablet
- High quality drinking water
English
11