Sweep Waveform Output; Sweep Selection - UNI-T UTG1000A User Manual

UTG1000A Series Function Generator User Manual
The shape of PWM modulation waveform checked through oscilloscope is shown as following:

4.2 Sweep Waveform Output

In sweep mode, frequency is output in linear or logarithmic way during the specified sweep time.
Trigger source can be internal, external or manual trigger; and sine wave, square wave, ramp wave and
arbitrary wave (except DC) can produce sweep output.

4.2.1 Sweep Selection

1) Enable Sweep Function
Press Menu button first, then press Sweep softkey to start sweep function. The device will output
sweep waveform with current setting.
71