Chapter 4 Advanced Applications 4.1 Roll Mode; Modulation Waveform Output; Amplitude Modulation (Am) - UNI-T UTG1000A User Manual

UTG1000A Series Function Generator User Manual

Chapter 4 Advanced Applications 4.1 ROLL mode

4.1 Modulation Waveform Output

4.1.1 Amplitude Modulation (AM)

Press Menu→Modulation→Type→ Amplitude Modulation in turn to start the AM function. Then the
modulated waveform will output with modulation waveform and carrier wave set.
Carrier Waveform Selection
AM carrier waveform can be: sine wave, square wave, ramp wave or arbitrary wave (except DC), and
the default is sine wave. After selecting AM modulation, press Carrier Wave Parameter softkey to enter
carrier waveform selection interface.
22