Frequency Measurement; Build-In Help System - UNI-T UTG1000A User Manual

UTG1000A Series Function Generator User Manual
Note: This parameter can be set by multifunctional knob and direction buttons.

3.4 Frequency Measurement

This device is suitable for measuring frequency and duty cycle of TTL compatible signals, with frequency
range of 1Hz to 100MHz. The frequency meter takes signal through the input interface (Input/CNT
terminal). Press Utility then Counter to collect Frequency, Period, and Duty Cycle values from input
signal. Note: When there is no signal input, frequency meter parameter list always shows last
measurement value. Frequency meter will refresh only when new TTL compatible signal is present at
the Input/CNT terminal.

3.5 Build-in Help System

The build-in help system provides relevant information for any button or menu softkey. You also can
use help topic list to get help. Operations for buttons help information are shown as following:
Long press any softkey or button to display relevant information. If the content is more than 1 screen
size, use softkey or multifunctional knob to display the next screen. Press "Return" to exit.
Note!
The built-in help system provides simplified Chinese and English languages. All information, context
help and help topic are displayed in selected language. Language setting: Utility→ System→Language.
21