Screen Settings - TANDBERG 3000 MXP User Manual

Far End Control
On The far end will be able to:
• Control your camera
• Select your video sources
• Activate your camera presets
• Request snapshots
Off The far end can access none of the four features above on the local system. You
will however still be able to control the camera on the far end.
Fallback to Telephony
When dialing a number and the system fails to place a video call to the number dialed, the
system will attempt to place a telephone call if Fallback to Telephony is enabled.
On Enables fallback from video calls to telephone calls.
Off Disables fallback.
Access Code
An access code will help you control the use of the system. All users must enter a code to
identify themselves and the call will be charged on their account. Access Codes are handy for
group systems where there are more users or divisions that share the costs of using the
system. Access Code can be put to On and Off.
On When making a call, an Access Code dialog box will be shown. The user must
enter the correct password in order to put the call through.
Off No password is necessary to make a call.

4.1.8 Screen Settings

Picture Layout(wide screen monitors only)
The Advanced Picture Layout is related to the Layout button on the remote control and it can
be used at any time to change the screen layout. For wide screen systems POP mode is
recommended. You will get optimized picture layouts for wide screen by pressing the Layout
button on the remote.
Picture in Pressing the Layout button on the remote will result in an extra picture in
Picture (PIP) smaller view (Picture in Picture. Press the Layout button to move it and
finally hide it.
Picture Pressing the Layout button on the remote will result in a smaller view
outside placed outside the big picture. Press Layout once more to get emulated
Picture dual monitor view. Press Layout again to go back to normal full screen
4 Administrator Settings
63