TANDBERG D1392602 User Manual page 29

TANDBERG Video Portal
EraseDisk
FeedbackDeregister
FeedbackRegister
D1392602
Example:
xCommand DisconnectCall ABCD123456
*r Result (status=OK):
*r/end
OK
This command wipes all the data from the internal harddisk
Example:
xCommand EraseDisk
*r Result (status=OK):
*r/end
OK
Command used to deregister XML feedback over HTTP(S).
Parameters:
•
ID: <1 .. 3> ID for the registration to deregister.
OK Result parameters:
•
ID: <1 .. 3>
ERROR Result parameters:
•
Cause: <1...> Cause code specifying why the command was not accepted by the system
•
Description Textual description of the cause code.
Example:
xCommand feedbackderegister id:1
*r Result (status=OK):
ID: 2
*r/end
OK
Command used to instruct the system to return XML feedback over HTTP(S) to specific URLs.
What parts of the Status and Configuration XML documents to monitor are specified by XPath
expressions. The system supports issuing feedback to 3 different URLs. The system allows a total
of 20 XPath expressions to be registered, with a maximum of 15 for a single URL.
Parameters:
•
ID: <1 .. 3> ID for the registration. If this parameter is omitted the system uses the first
vacant ID.
•
URL(r): <S: 0, 256> The URL to post feedback to.
•
Expression: 1 .. 15: <S: 0, 256> XPath expression
OK Result parameters:
•
ID: <1 .. 3>
ERROR Result parameters:
Data port Command Interface User Guide
29