KitchenAid 5KVJ0333 Manual page 11

ASSEMBLING THE CENTRIFUGAL JUICER
Place the disc inside the juicing bowl on
3
top of the rotating hub. Rotate the disc
until the tabs on the inside of the collar
match up with the notches on the hub
and the disc settles easily into place.
Slide the food pusher down the feed
5
chute, aligning the groove in the food
pusher with the protruding rib on the
inside of the feed chute.
Place juice pitcher under the juice spout.
7
Make sure juice spout is in the down
position.
Rotating
hub
4
6
NOTE: The lid of the juice pitcher comes
equipped with a foam guard. To include the
foam with your juice, simply remove the lid
before pouring juice into your glass.
Place the juicer lid over the bowl
housing so that the long lid section
is slightly to the right of the pulp exit
chute. Grip the feed chute, turning the
lid clockwise until it locks into place.
Slide the pulp basket into position under
the long lid section until it rests against
the motor body.
11