Page 1
SenSor control panel S22 Wi-Fi USER’S MANUAL...
Page 2
Control ........................................ 7 This user’s manual is a main operating document intended for technical, maintenance, and operating staff. The manual contains information about purpose, technical details, operating principle, design, and installation of the S22 Wi-Fi unit and all its modifications.
Page 3
S22 Wi-Fi www.blaubergventilatoren.de • When the unit generates unusual sounds, • Do not use damaged equipment or cables odour or emits smoke disconnect it from when connecting the unit to power mains. power supply and contact the Seller. • Do not touch the unit controls with wet •...
Page 4
S22 Wi-Fi www.blaubergventilatoren.de TECHNICAL DATA Power supply voltage, 50 (60) Hz [V] 110-230 42,5 mm (1 / ") 82 mm (3 / ") Maximum current [A] 0.012 13,5 mm ( / ") Cable type 2х0.35 mm 60 mm (2 / ") ...
Page 5
S22 Wi-Fi www.blaubergventilatoren.de Example 2: connection via router with one Wi-Fi access point. Connect the ventilation unit to the Wi-Fi access point that is integrated in the router. For details, please refer to the manual for the wireless control system.
Page 6
S22 Wi-Fi www.blaubergventilatoren.de 1. Install the mounting box. Wall flush mounting: prepare a wall opening, lay required Wall surface mounting: lay required wires and cables to the wires and cables to the installation place and install the installation place, bore the holes and fix the mounting box on mounting box.
Page 7
S22 Wi-Fi www.blaubergventilatoren.de CONTROL INDICATION AND FUNCTIONS OF THE CONTROL PANEL BUTTONS Wi-Fi Speed 3 Filter maintenance Speed 2 No heat recovery mode Speed 1 Alarm indicator To turn the unit on or change speed stage press any inactive speed button. Once activated, the button starts glowing, and the ventilation unit runs with the set speed.
Need help?
Do you have a question about the S22 Wi-Fi and is the answer not in the manual?
Questions and answers