Advertisement
SET UP INSTRUCTIONS
3. Connect the USB Wall Power Adapter
onto the "A" end of the 6 ft. POWER
CABLE, and then connect the "B" end of
the POWER CABLE to the HOMBT1
Scale Unit "Power In" Port. (Note: This
provides power to the HOMBT1 Scale
Unit)
B
4. Connect the USB Wall Power Adapter to
a wall power outlet as shown.
HOMBT1 Scale Unit
P/N UMPELSTARONE-P Rev20190312
A
6
Scale USB Port
TO SCALE
SCALE UNIT - Connected to scale
by adhesive label with Velcro
POWER IN - Connected to USB Wall
Power Adapter
®
Advertisement
