Advertisement
SET UP INSTRUCTIONS
Note: If multiple printers were purchased, do not mix and match the wireless adapters (blue
box) and printers. Each printer has been paired to communicate with a specific adapter.
1. Connect the "A" end of the SCALE
CABLE (1 ft. USB cable) into the "TO
SCALE" USB port on the HOMBT1 Scale
Unit. Connect the "B" end of the cable to
the scale's USB port.
B
2. Separate the 2 halves of the Velcro
adhesive affixed to the HOMBT1 Scale
unit. Peel off the protective backing on
free side of the Velcro
the scale. Then Velcro
to the scale.
P/N UMPELSTARONE-P Rev20190312
A
®
®
and attach it to
®
the HOMBT1 unit
5
Advertisement
