Technical Data; Intended Use; Electrical Connection And Operation - Festool ES 125 Q Instruction Manual

21 Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tools
operation. If damaged, have the tool
serviced before using. Many accidents are
caused by poorly maintained tools.
22 Use only accessories
recommended by the manufacturer for
your model. Accessories that may be suitable
for one tool, may become hazardous when used
on another tool.
Service
23 Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified personnel
could result in a risk of injury.
24 When servicing a tool, use only identical
replacement parts. Follow instructions in
the Maintenance section of this manual. Use
of unauthorised parts or failure to follow
Maintenance instructions may create a risk of
electric shock or injury.

Technical data

Wattage
No load speed
No. of strokes
Sanding stroke
Sanding base
Weight
Safety llevel
Symbols
V volts
A amperes
Hz hertz
W watt
alternating current
n no load speed
0
Class II Construction
rpm revolutions per minute
spm strokes per minute

Intended use

The sanders are designed for sanding wood,
plastic, composite materials, paint / varnish,
filling material and similar materials. Metal and
materials with an asbestos content must not
be processed with these tools.
The machine is particularly suitable for
processing smaller surfaces and overhead work
because of its size, its weight and its output.
The machines must not be damp nor operated
in a damp environment for electrical safety
reasons. The machines may only be used for
dry sanding.
All manuals and user guides at all-guides.com
that are
ES 125 Q
W 200
rpm 13 000
spm 26 000
mm (in.) 2.0 (0.08)
mm (in.) Ø 125 (4.9)
kg (lbs) 1.1 (2.4)
UL 745, CSA C22.2 No. 745
Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-
treated lumber.
The risk from these exposures varies,
depending on how often you do this type of
work.
To reduce your exposure to these
chemicals: work in a well
ventilated area, and work with
approved safety equipment, such
as dust masks that are specially
designed to filter out microscopic
particles.
The user bears sole responsibility
for any damage or accidents resulting from
incorrect use.

Electrical connection and operation

The mains voltage must correspond with the
voltage on the rating plate!
See the following Fig. for connecting or
disconnecting the power cord of the tool.
Always switch the machine off
before connecting or disconnecting the power
cable!
3
ES 125 EQ
200
6 000 - 13 000
12 000 - 26 000
2.0 (0.08)
Ø 125 (4.9)
1.1 (2.4)