Table of Contents
Advertisement
WARNING
Do not wrap the cord around the
main body and handle when
storing.
circuit.
Do not store or use the cord in a twisted state.
- Doing so may cause the wire in the cord to
Always unplug the unit by holding the plug
instead of the cord.
circuit.
Regularly clean the plug to prevent dust from
accumulating.
and wipe with a dry cloth.
After use, always set the main switch to
position [ ], and unplug the unit from a
household outlet.
Fully insert the plug.
Make sure to use only 220 V
Independently use a household outlet, and do
not use extension cord.
- Failure to do so may cause electric shock or
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
- Failure to do so may cause an accident or injury.
In case of an abnormality or malfunction
Immediately stop using the unit and remove
the plug if there is an abnormality or failure.
- Using the unit in such conditions may cause
<Abnormality or failure cases>
Air is not emitted.
Unit stops sporadically.
The interior gets red, and smoke comes out.
Maintenance
When you see sparks around
the air outlet while using the hot
air setting, stop using and
remove the lint on the air outlet
and air inlet.
voltage.
5
Advertisement
Table of Contents
