cold alternating mode to set the hairstyle and make
your hair shiny and smooth. (See page 16)
After use, set the
5
5
power switch to [ ].
nanoe™ lamp will off.
After setting the power
and LENGTH will keep
light on.
Unplug the power plug.
6
6
place after it has fully cooled down.
Note
outlet and inlet.
corner of a desk, etc.
14
The mode lamps stay
lighting on (after
Notice
Styling and treatment agents etc. can be used.
wax, the intended effect of nanoe™ and mineral ion may
Since nanoe™ are generated, you might encounter
the following.
during use.
Select air temperature
After starting up, press
air temperatures.
Notice
switch to HOT mode.
any air temperature setting.