Philips HQC483 User Manual page 10

ENGLISH
12
C
C
C
C
4 Clean the cutting unit and the inside of the
appliance with the brush supplied.
5 Place the lug of the cutting unit into the
slot and push the unit back onto the
appliance.
6 Make sure you push the cutting unit back
until you hear a click.
Replacement
A worn or damaged cutting unit should only be
replaced with an original Philips cutting unit.
1 Push the middle part of the cutting unit
upwards with your thumb until it opens
and then pull it off the appliance.
2 Place the lug of the cutting unit into the
slot and push the cutting unit back until
you hear a click.
Environment (HQC482 and HQC483 only)
The built-in rechargeable battery contains
substances which may pollute the environment.
Remove the rechargeable battery when you
discard the appliance.